Prop Jack T-Model
Ceiling Jack T-Model
Safety system for storing molds using a variety of ceiling jack
A ceiling jack is used for piles operation below ceiling framing and/or concrete beam. The quality of the analysis of pipes and all parts used in prop jack T-Model (ceiling jack) is St37, which is in accordance with German standard DIN 17100/80.
This type of steel is special for the Construction industry and Building structures, according to which the prop jacks are produced in our network of local manufacturers, they are capable to bear 1500 kg load.
The thickness of the pipes used in our prop jack is in accordance with the customer’s request.
Although commonly pipes used in scaffolding jacks are 2 mm thick and 5 or 6 centimeters in diameter.
Prop jack T-Model is the most suitable and economical tool for executing concrete slabs, iron beam and block. These jacks are produced at a height of 3 to 4.5 meters. These prop jacks also have holes to adjust the height. Cross-shaped jacks are also manufactured according to customer needs.
For taller ceilings, scaffold systems are recommended.
For safety, the end of prop must be fixed. There are many reports on formwork failure as result of out of alignment of props during concrete pouring.
By using a prop brace, you can decrease the unbraced length and increase the allowed stress and loading capacity of props.
Cross Jack
The appearance of this type of jack, as can be seen from their name, is in the form of a cross or the English T. Ceiling jacks are generally two models, the only difference being in the head of their jack, one of which is U-shaped or the same as the Iraqi ceiling jack. And the second type is the cross ceiling jack.
Significant improvements have been made in construction equipment to date. This equipment helps a lot in building very tall buildings. In addition to making construction easier, it ensures the safety of workers. It is one of the most important scaffolding equipment. Scaffolding is widely used in the construction of high-rise buildings.
- You can specify the thickness, dimensions, surface , materials and style because we can do it